Address: Plant 1, West Row, Filtration Industry Zone, Dazhaoying Town, Xinxiang, Henan, China
Lubrication of the gearbox is very important. Good lubrication to the gears and bearings play a sufficient protective effect to the gears and bearings.
Lubricant oil film, non-contact rolling and sliding, which play a role in lubrication.
At the same time, the rotation will have the relative rolling friction and sliding friction, which will produce a certain amount of heat, and high temperatures will burn gears and bearings.
So lubricants play the role of lubrication on the one hand, on the other hand play a cooling effect.
The Wanhe lubrication system consists of 3 major parts: Power unit, Cooling unit, Filter unit
Operating temperature: 5℃- 90℃
Specified for a variety of gear box lubricants
Temperature control valve to control oi flow through cooler. (Temperature range 45- 60℃, per application specification)
The system is equipped with a relief valve and pressure sensors to ensure continuous, safe operation
The system provides low vibration, low noise operation
Scope: 1.5MW, 2MW, 3MW, 5MW and other wind gear boxes
Wanhe uses special motors, gear pumps, couplings and other components to ensure maximum reliability.
Two-speed motor adapts to the viscosity of the oil to provide optimal flow rate.
Gear pump imported from Germany can be used to pump a variety of fluids.
High insulation, high protection, low noise, low vibration, long service life
The motor is a two-speed motor, operating according to the viscosity of the oil to provide the appropriate flow rate.
Maximum static pressure: 26 bar
Rated inlet temperature: 70 ℃
Design pressure: 1.6MPa (16 Bar)
Design temperature: -20-120℃
Flow: 0-1000L / min
Working pressure: 0-20bar
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.